When there are less expensive popsicle molds out there, to spend this much money on molds seems outlandish, especially when the economy is so up in the air. I looked ahead and realized toilet paper, workout gear and swimming pools are getting out of stock, and with summer here, moms and dads everywhere are going to want to keep their kiddos entertained and fed with summer treats. Popsicles are equivalent to summer so I splurged and bought a set. Best quarantine purchase so far!
I went with the metal molds because metal should outlast silicone and plastic and I wanted a set that will last several years.
The inside metal of each mold is a matte finish and with the outside nice and shiny. The molds sit nicely in the rack and the lids fit gently on the top of the molds. The lids are not meant to be sealed or fit tightly, more of a covering in the freezer. No big deal though because when the popsicles freeze, the lid is firm and holds well. The set comes with bamboo sticks in a cute little bag and can be replaced with more sticks or regular popsicle sticks. The lids also have rubber discs to slid the sticks into. These work great to hold the sticks securely in the lids and come in a variety of colors which work great to identify different flavors of popsicles if you made more than one at a time, or if the kiddos like one color over the other. These also come in a draw string bag with extras. The only draw back I have noticed is one of our seals got pulled out of the lid and pops out easily. Not a big deal but just an FYI.
As far as cleaning, I have found that cream based popsicles tend to leave a residue that it tricky to clean. Two things help this- using a baby bottle brush to get into the crevices or just a quick rinse when you are done eating. Again, not a big deal but just a handy hint.
I have not tried using them in the dishwasher since the sink seems to always have soapy water and they are so easy to clean. After all, we are in quarantine- we should have time to clean popsicle molds!
As far as recipes, I went online to Pinterest, which we all love, and found some good ones, and I have also just used juice with crushed fruit that I had on hand. I also went crazy and mixed juices with some whipping cream (unwhipped) and some with coconut cream. I have thought about making extra smoothies and pouring it into the molds but never seem to have enough of that leftover.
When frozen, I either leave the remaining popsicles in the mold until we eat them or I have taken the remaining out and layered them in a glass storage container with parchment paper for a quick grab. I also place the mold on top of this in my freezer since the rack has wire footings like my freezer shelf and it won't tip over.
All in all, these molds are great and well worth the money. Enjoy!
Customers who viewed this item also viewed
Page 1 of 1 Start over
- Zoku Classic Pop Molds, 6 Easy-release Popsicle Molds With Sticks and Drip-guards, BPA-free$7.47 shippingGet it as soon as Tuesday, Apr 14
- Baffect Metal Popsicle Moulds, Set of 6 Round Head Stainless Steel Ice Lolly Molds with Holder, Fast Freezing Ice Cream Makers with Lollipop Sticks and BagsAmazon's Choice$9.10 shippingGet it as soon as Tuesday, Apr 14
- HYDDNice Stainless Steel Popside Molds Kit, 10 Ice Pop Makers Mold with Rack, 10 Silicone Seals, 100 Reusable Bamboo Sticks, 20 Pop Bags,Cleaning Brush$10.42 shippingGet it as soon as Tuesday, Apr 14
- Ecozoi Stainless Steel Popsicle Molds and Rack - 6 Square Ice Pop Makers + 30 Reusable Bamboo Sticks + 12 Silicone Seals + 1 Cleaning Brush +1 Rack$9.10 shippingGet it as soon as Tuesday, Apr 14
- Stainless Steel Popsicle Molds, Set of 6 Ice Cream Maker, Ice Pop Molds With Holder, Metal Reusable Homemade Popsicle Molds with Sticks and Bags (Round Cup, No Slot)$9.10 shippingGet it as soon as Tuesday, Apr 14
Product Videos
Product information
Warranty & Support
Product Warranty: For warranty information about this product, please click here
Feedback
Similar brands on Amazon
Page 1 of 1Start Over
Sponsored
Customers say
Customers find the popsicle mold to be of good quality, easy to remove popsicles from, and super easy to use and clean. The stainless steel construction is appreciated, with one customer noting it's better than plastic alternatives. While the mold works well and customers consider it worth the money, there are mixed experiences with durability, with some units arriving scratched and others standing the test of time. Leakage is also a concern for some customers.
AI Generated from the text of customer reviews
Select to learn more
158 customers mention quality, 151 positive, 7 negative
This is a great product ...I make smoothies for my boyfriend in the morning and i always make a bit to much....i just put the rest in these and then...Read more
...The molds seem to be of good quality but the rack has several metal burrs that will certainly cut someone. Quality control is lacking....Read more
These are so well-constructed, great quality. I use them all summer long for ice pops and fudge pops.Read more
This is the best popsicle mold I've ever used. Easy to remove pops! The only problem is I'm eating a lot of popsicles.Read more
118 customers mention ease of cleaning, 96 positive, 22 negative
...Easy to clean. Easy to fill. All the kids liked the shape of these popsicles and gobbled them up. Overall, we are all very please with this product.Read more
easy to use, clean and fill keeps upright for even fill and freezes fast. I have had many plastic ones in the past but this product can't be beat.Read more
...They are so easy to remove. put under the faucet for a couple of seconds and they slide right out. I love how easy they are to use and clean....Read more
...These are easy to use, and it is easy to remove the popsicle by just dipping the mold into room temp water....Read more
69 customers mention ease of use, 66 positive, 3 negative
These were easy to use and make popsicles. Based on what some reviews said, I dont leave the popsicles more than a day in the metal popsicle holder....Read more
I LOVE this popsicles mold! It’s traditional, easy and top quality. I purchased one for a gift after realizing how nice it is....Read more
Best popsicle molds I've tried yet. Easy to fill, they stay upright with no falling out of their "cage", and they slip out of the mold with...Read more
I like this one. It is very easy to use and clean up.Read more
62 customers mention functionality, 61 positive, 1 negative
Great product ! Work great! Make sure you run cold water outside frame and a little bit to release popsicles!Read more
...I was concerned about there being metal shavings, but found none. Works great.Read more
I like the product, and it works well except 1 of the 6 holders leaked from the very first time I used it. So only 5 can be used....Read more
Works perfectly! Dishwasher safe, easy to use, we even throw the popsicle sticks in the dishwasher and re-use them too!Read more
54 customers mention material, 46 positive, 8 negative
I've used these all summer. Pros: Stainless steel, you can freeze a batch pop them out and immediately make another batch without waiting for...Read more
...The sticks are re-usable. Works really well and nice and sturdy and no plastic....Read more
...This was a great buy and the fact that it's stainless means it will stand the test of time! Thank you for offering a great product!!!!Read more
Haven't used this yet, but love that it's not plastic. Very sturdy construction - should last forever!Read more
75 customers mention durability, 49 positive, 26 negative
These are sturdy and well made. Sit securely in the freezer. I could not find a sturdy metal ice cube tray so I will use this to make ice.Read more
not what I expected very flimsy and difficult to use....Read more
...Rendering this a superior product well worth the money, durable, re usable, awesome. But if you've got demand for cicles, you'd better buy two....Read more
Perfect size and very durableRead more
63 customers mention value for money, 32 positive, 31 negative
...Yeah, they're a little pricey, but its 100% worth the money. No more buying popsicles from the store with unnecessary extra sugar or preservatives....Read more
Expensive. But no worries about what's in the plastic, as this is all metal. I was concerned about there being metal shavings, but found none....Read more
...They are expensive but worth it! Very easy to remove the pops. Just run them under warm water for 30 seconds or so. Feels like a real treat!Read more
Pricey, but really worth it.Read more
51 customers mention leakage, 29 positive, 22 negative
I’ve used this mold to make popsicles and it worked very well. Very sturdy design— I will be using this mold for years to come!Read more
these have a undisclosed costing on the inside- just look at them outside in the sun and you will see the “sparkle” on the inside....Read more
...Have not tried making paletas yet (tomorrow!) but they are super sturdy and quite pretty as well....Read more
I like the product, and it works well except 1 of the 6 holders leaked from the very first time I used it. So only 5 can be used....Read more
I’ve lost a lid!!
I love these. But I’ve lost a lid. Is there a way to get a replacement?
Top reviews from the United States
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United States on July 4, 2020
- Reviewed in the United States on August 20, 2019
- Reviewed in the United States on October 27, 2025
- Reviewed in the United States on May 29, 2018
LOVE these popsicle molds. I was going back and forth trying to decide which ones to buy and these were most recommended by recipe bloggers. I am so happy with how easy they are to use and how well my popsicles turned out. To release the popsicles from the molds, I did as others recommended & just dipped the frozen mold into a cup of warm water for a couple seconds and they came right out. So excited to try out more flavors. Highly recommend this product!
Pros: love the individual metal molds, makes it easier to work with. The metal tops with the rubber pieces hold the popsicle sticks perfectly. No “floating” sticks popping back up, the holder kept them straight. Love the metal stand, makes it so easy to set & put in the freezer without taking a lot of space.
Cons: the only problem was that I am limited to the 6 molds so I might get a second set so I can make more at one time. Otherwise, they really are perfect.
I attached a pic of the first batch: peach & vanilla yogurt swirl. Not the prettiest but they are delicious! These molds make it easy to create layers if you want to get fancy.
Images in this review
- Reviewed in the United States on October 30, 2024
- Reviewed in the United States on May 14, 2023
It makes good popsicles. I had to clean them several times to get the film off the inside of the mold - gross. There is a different coating on the inside that I'm suspicious about. I would like more details on the packaging.
Also, some of the reusable bamboo popsicle sticks were splintered.
I'm not super excited about my purchase, but haven't returned it yet.
Images in this review
Top reviews from other countries
- WestmanReviewed in Canada on June 29, 2017
Simply the best ice pop molds on the market
- Eternal SenshiReviewed in Canada on July 24, 2017
Perfect treat for hot summer days
